Next Advance Inc produces: the Freedom Rocker which automatically processes western, southern, and northern blots and gels; laboratory platform rockers; pressure injection cells; and more.

We specialize in Homogenizers, Rockers, Pumps, and Automated Blot Processors. Call 1.518.674.3510
Automated
Blot Processor		 Capillary Loader Syringe Pumps Homogenizer
Cell Disrupter


Design by DanubeNet

Innovative Lab Products for the Life Sciences

The Bullet Blender™ and Bullet Blender™ Blue
Layer by layer, away it goes!

Your epithelium samples stay cool

during homogenization!


The Bullet Blender™Lyse E. coli and other cells. Homogenize or disrupt tissue. The Bullet Blender is quiet and user friendly.

> No Cross Contamination
> Samples stay cool
> Convenient
> Risk  Free
> Established protocols

Homogenize up to 24 epithelium samples simultaneously - in just
5 minutes or less!

 

The Bullet Blender™ enables you to homogenize up to 24 samples (skin or other tissues) in separate microcentrifuge tubes at a time.  Load up to 300mg epithelial tissue with your application buffer and grinding beads in standard polypropylene microcentrifuge tubes.  Place the tubes into the Bullet Blender™ (pictured above) or Bullet Blender™ Blue.  The "bullets" in the "blender" vigorously strike all the sample tubes as the instrument runs for a few minutes.  The agitation of the grinding agents with the tissues homogenizes the samples.

The Bullet Blender™ and Bullet Blender™ Blue enable you to disrupt or homogenize up to 24 epithelium and other tissue/cell samples at a time.  Load the samples in standard polypropylene microcentrifuge tubes into the Bullet Blender ™.  Balls (the "bullets") repeatedly strike the sample tubes in a controlled manner, thousands of times per minutes, inducing vigorous motion of the skin samples or other substances inside the tubes, providing efficient mixing. With beads in the tubes, the samples are thoroughly homogenized. Tune the extent of disruption by adjusting the speed. Click here to see sample protocols.

> No Cross Contamination

The samples are homogenized (or mixed) non-invasively.  The sample tubes are kept closed during agitation, as the samples are processed.  There are no probes to clean between samples.

> Samples Stay Cool

The instrument uses very little power due to the unique, patented design.  It uses a small DC motor to agitate the individual tubes, not ultrasonics.   Also, because the motor does not need to agitate any heavy platforms or plates, it is small and will last for years.

> Convenient to Use

Simply place your skin and other tissue samples or cell cultures and some beads in standard high quality polypropylene tubes, and load the tubes into the Bullet Blender™.   Set the duration (typically a few minutes) and speed (vigorousness).  There are no probes to clean.  And it is quieter than a sonicator and does not heat up your samples more than a few degrees!

> Risk Free Purchase

The Bullet Blender™ comes with a 30-day money back guarantee and a two year warranty, with a three year warranty on the motor.  The simple, reliable design enables the Bullet Blenders™ to sell for a fraction  of the price of ultrasonic or other agitation based instruments, yet provides an easier, quicker technique.

> Established Protocols

Protocol for Epithelial Tissue Homogenization in the
Bullet Blender™

The protocol described in this document is for the use of the Bullet Blender™ for the homogenization of epithelial tissue (from a variety of animals). Note that the time and speed settings may differ due to the variation in consistency/texture of various types of epithelial tissue, and variations from species to species. This protocol does not specify a particular buffer-- you may choose which is most appropriate for your downstream application (nucleic acid isolation, protein extraction, etc.).

Materials Required:

epithelial tissue, saline, Bullet Blender™, homogenization buffer, pipettor, microcentrifuge tubes, and 0.5mm zirconium silicate beads (part number ZSB05).

Instructions:
  1. Cut tissue into appropriately sized pieces for analysis (5mg-300mg) and place into a microcentrifuge tube. If possible, use long, thin pieces.
  2. OPTIONAL: Wash tissue 3x with ~1mL PBS. Aspirate. NOTE: This step removes external contaminants (blood, etc.).
  3. Add zirconium silicate beads (0.5mm) to the tube. Use a mass of beads equal to 1.5x your mass of tissue. One scoop of beads ≈ 192mg.
  4. Add 0.025mL to 0.6mL buffer (2 volumes of buffer for every volume of cells, minimum of 25μL).
  5. Close the microcentrifuge tubes.
  6. Place tubes into the Bullet Blender™.
  7. Set controls for SPEED 8 and TIME 5 minutes. Press Start.
  8. After the run, remove tubes from the instrument.
  9. Visually inspect samples. If homogenization is unsatisfactory, run for another two minutes at SPEED 10.
  10. Proceed with your downstream application.
SAFETY NOTE!!!

When using a centrifuge to separate your homogenate from the debris and beads, make sure your tubes are balanced.




The Bullet Blender™ home page shows the entire family of products and links to other applications.