|
|
|
SP1000 $750
-
Holds 1 Syringe up to 60
cc
-
Infusion rates from 0.001
µL/hr (0.5 µL syringe) to 2100 ml/hr (60 cc syringe)
-
Easy-to-use keypad
interface
-
Space Saving Chassis: Foot
print size of only 5 3/4" x 8 3/4"
-
Very easy to set up, just
enter the syringe diameter, dispense rate, dispense
volume, and press start
-
Advanced functions and
programming features
-
Motor stall detection
-
Reliable
and accurate.
Designed and manufactured in the USA.
|
Example flow rates per syringe
(valid for SP1000 and SP500 pumps)
Syringe
Size (cc)
|
Maximum
Rate
(mL/hr) |
Minimum
Rate
(µL/hr) |
|
0.5 µL |
25.49 |
0.001 |
|
1 |
53.09 |
0.73 |
|
3 |
192.5 |
2.646 |
|
5 |
406.1 |
5.581 |
|
10 |
600 |
8.244 |
|
20 |
975.8 |
13.41 |
|
30 |
1282 |
17.63 |
|
60 |
2120 |
29.13 |
|
|
Purchase the SP1000 online:
|
|
*NEW!* The SP1010, with twice the force of the SP1000 and 3x the maximum speed! $830
|
Multi-syringe pumps
The syringe plungers travel in sync at the same rate.
|
 |
|
 |
|
 |
|
SP2200 $975
Similar to SP1000 but holds 1 or 2
syringes of up to 60 cc each. The syringes can be different sizes (this model only).
Infusion rates from 0.001 µL/hr (0.5 µL syringe) to
7630 ml/hr (60 cc syringe)
|
|
SP1600 $1500
Similar to SP1000 but holds 2, 4,
or 6 syringes (same size) of up to 60 cc each.
Infusion rates from 0.001 µL/hr (0.5 µL syringe) to
1337 ml/hr (60 cc syringe)
Higher flow rate models available
|
|
SP1800 $1500
Similar to SP1000 but holds 2, 4, 6,
or 8 syringes (same size) of up to 10 cc.
Infusion rates from 0.001 µL/hr (0.5 µL syringe) to
380 ml/hr (10 cc syringe)
Higher flow rate models available
|
|
|
Features (of SP1000, SP2200, SP1600, and SP1800):
-
Built
for Automation
-
Operates stand-alone or from a computer
-
Infusion and withdrawal by rate and/or volume
-
Programmable
preset protocols
-
Program up to 41 pumping phases that change pumping
rates, set dispensing volumes, insert pauses, control
and respond to external signals, sound the buzzer
-
RS-232 and TTL logic control interfaces
-
Network, control, and monitor up to 100 pumps with one
computer
-
Worldwide power supplies available
-
Motor
stall detection
-
Dispensing accuracy of +/-1%
-
Unlimited lifetime technical support
-
Two
year warranty
*** Not for clinical use on humans
***
See our
Syringe Pump brochure.
|
|
The pumps are often used in dual-pump
setups, possibly with check valves for continuous pumping
so that one syringe dispenses while the other reloads.
|
 |
|
|
|
|
SP300 $325 "Just infusion"™ Syringe
Pump
|
Just the features that you want, and none that
you don't want to pay for. Similar to the
SP1000 with just the basic features. Does not
withdraw, volume target, or have computer interface.
- Holds small or big syringes up to 60 mL
- Pump continuously until you stop the pump
- Infusion rate can be changed while pumping
- Remembers previous settings on power up
- Power failure mode allows pump to continue
pumping after a reset
- Syringe purge mode
- Displays total volume dispensed in mL or
µL units
- Maximum pumping rate of 1500 mL/hr with a
60 mL syringe
- Minimum pumping rate of 0.001 µL/hr with a 0.5 µL syringe
- Precise reproducible flow rates
- Selectable infusion rates units: mL/hr,
µL/hr, mL/min, µL/min
|
|
SP500 $545 OEM
Version
*NEW!* The SP510, with twice the force of the SP500 and 3x the maximum speed! $595
|
Designed for OEM applications, this pump has the
same mechanisms and electronics as the SP1000
aside from the front panel controls.
- Built for Automation
- Operates from a computer
- Infusion and withdrawal
- Set a single pumping rate and/or
dispensing volume
- Program up to 41 pumping phases that
change pumping rates, set dispensing volumes,
insert pauses, control and respond to external
signals, sound the buzzer
- Network, control, and monitor up to 100
pumps with one computer
- Motor stall detection available in NE-501
model ($600)
- Dispensing accuracy of ± 1%
- Unlimited lifetime technical support
-
Two year warranty
|
|
SPK-OEM Starter Kit for SP500
$35
 |
|
|
|
SPPS Power supply for the SP500 OEM Pump
Needed for additional OEM pumps used in a pump network in a
laboratory setting. $25 |
|
|
FTSW Foot switch
$40
 |
Foot switch for the syringe pumps
- Start, stop, or trigger the next phase on your syringe pump
- Usable with any pump except the SP300
- Attach to an SP500 to allow stand-alone operation
- Utilizes the TTL logic port on syringe pump
- Quick and simple setup
|
HEAT Syringe Heater
$425
 |
Compact, efficient heating device for temperature-controlled dispensing
- Heat syringe to 100+°C
- Temperature sensor in heating wrap
- Up to 16 heating wraps can be attached to the control unit using HEAT2 and HEAT3
- Heating wrap does not interfere with syringe pump
- Quick and simple setup
|
HEAT2 Secondary Syringe Heating Wrap
$125
 |
Compact, efficient heating device for even more temperature-controlled dispensing
- Heat syringe to 100+°C
- Inexpensive way to heat a second syringe - Requires HEAT
- Attach even more heating wraps using HEAT3
- Heating wrap does not interfere with syringe pump
- Quick and simple setup
|
HEAT3 Tertiary Syringe Heating Wrap
$95
 |
Compact, efficient heating device for an array of temperature-controlled dispensing
- Heat syringe to 100+°C
- Inexpensive way to heat an array of syringes (requires HEAT and HEAT2)
- Heat up to 16 syringes with HEAT, HEAT2, and up to 14 HEAT3 heating wraps
- Heating wrap does not interfere with syringe pump
- Quick and simple setup
|
|
See our
Syringe Pump brochure.
*** Not for clinical use on humans
*** |
