Would you like a simple, pain-free way to quickly validate the accuracy of your pipettes and automated liquid handlers? What if it also worked with most sample liquids, required no equipment or its calibrations, was extremely portable, and was better than 2% accurate?
We designed the Checkit® Go with all these considerations in mind. It’s a simple, quick, cost-effective check to see if your instrument is dispensing what it says it is –and is guaranteed to be accurate to 2%. This device can directly provide volume measurements, without all the work!
You can use the Checkit Go to measure up to 8 channels at a time. The entire process is complete in just seconds. Once the tab is flipped, evaporation is significantly reduced because the only exposed surfaces are at the ends of the capillary. This is much less surface area than a droplet of water in a weigh boat.
With the Checkit Go, you are taking a direct measurement instead of measuring weight and then using density to convert to a volume. You are not limited to just using water either. You can use solutions and chemicals that you are actually working with.
The free Checkit Go app provides a convenient report of all the volume measurements for you. Use the app to scan Checkit Go cartridges to document the pipetting accuracy of your robot.
You can then view or download a complete report, including statistical analysis of the pipetting accuracy and precision and images of the scans. Or, if you are in a compliant environment, you can use our dedicated recorder device for generating reports.